SD-BLDBS
Saturday, October 17, 2009
Wednesday, October 14, 2009
This is My stock DP with 1.5 Yokomo FCD Gear
Yokomo Drift Package with 1.5 Yokomo Over drive gear.
This is My stock DP which I used in Cam car so far.
I tuned at Arai. As for Oct 11th 09'
Track surface; Polished concrete
Tier; Kawada Plastic Drift Tier ( Medium )
Motor & ESC; Novak XBR with EX 10.5 Motor
Front
-6 deg camber
0mm Toe
0mm kick up on 4deg Caster hubs.
5.0mm ride height
3oz bumper weight
Stock DP Type B springs
0 Trailing Steering Block ( SD-415SG )
Modified steering Lock ( sharpened C-Hub )
No Sway-Bar
Rear
-1 deg camber
0 kick up
Swift Green
6mm ride height
Rear Suspension Mount Toe 3
No Sway-Bar
I put shock oil of Yokomo #250 in front and rear shocks.
Drive Train
Super gear 78T ( 48 pitch )Pinion gear 25T
Front loosened ball diff ( I tightened to the lock adjust screw and loosened 1 3/4 turn )
Direct drive main drive shaft ( no center one-way )
I did CS in front one-way so far, and some control were difficult with front ball diff. There are few angles of CS and Drift angles when I compare it with my BD. But I can make CS run.
I will try to setting up a little more after this and run.
This is My stock DP which I used in Cam car so far.
I tuned at Arai. As for Oct 11th 09'
Track surface; Polished concrete
Tier; Kawada Plastic Drift Tier ( Medium )
Motor & ESC; Novak XBR with EX 10.5 Motor
Front
-6 deg camber
0mm Toe
0mm kick up on 4deg Caster hubs.
5.0mm ride height
3oz bumper weight
Stock DP Type B springs
0 Trailing Steering Block ( SD-415SG )
Modified steering Lock ( sharpened C-Hub )
No Sway-Bar
Rear
-1 deg camber
0 kick up
Swift Green
6mm ride height
Rear Suspension Mount Toe 3
No Sway-Bar
I put shock oil of Yokomo #250 in front and rear shocks.
Drive Train
Super gear 78T ( 48 pitch )Pinion gear 25T
Front loosened ball diff ( I tightened to the lock adjust screw and loosened 1 3/4 turn )
Direct drive main drive shaft ( no center one-way )
I did CS in front one-way so far, and some control were difficult with front ball diff. There are few angles of CS and Drift angles when I compare it with my BD. But I can make CS run.
I will try to setting up a little more after this and run.
Subscribe to:
Posts (Atom)